PROJECT CP 20 EWI version + MIXPRO 70 mixer spraying set
Product datasheet 
Advice & DocumentsProduct datasheet
Description
Set composed with a spraying machine and a continuous mixer.
A vibrator is attached to the tank of the machine for a better descent of the product towards the bottom.
The MIXPRO 70 mixer allows a quick and homogeneous mixing of powdered products.
It is equipped with a level sensor that controls the level of product in the spraying machine tank, a speed controller and a water doser.
A vibrator is attached to the tank of the machine for a better descent of the product towards the bottom.
The MIXPRO 70 mixer allows a quick and homogeneous mixing of powdered products.
It is equipped with a level sensor that controls the level of product in the spraying machine tank, a speed controller and a water doser.
Applications
Wide variety of applicable products including powder and ready-to-use : glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
Technical characteristics
MACHINE
Product pressure
0 to 20 bar
Product flow-rate
0 to 20 kg/min
Machine motor power
1,5 kW
Comp. absorbed air flow-rate
284 L/min
Compressor power
2,2 kW
Maximum air pressure
10 bar
Power supply
230 V - 16 A - 50 Hz
Tank capacity
100 L
Maximum grain size
5 mm
Pump
MAP 6
Integrated vibrator
yes
Dimensions (L x w x h)
130 x 70 x 75 cm
Weight
135 kg
Noise level
94 Lwa
MIXER
Mixing type
continuous
Motor
0,75 kW
Forward / reverse rotation speed
50 to 280 RPM
Power supply
230 V - 10 A - 50 & 60 Hz
Tank capacity
40 L
Water meter
integrated
Mixing paddle
continuous scew
Dimensions (L x w x h)
81 x 57 x 49 cm
Weight
41 kg
Delivered with
- a Ø25 mm x 20 m air/product hose
- a pressure controller with adapter
- a MAP 6 pump
- a carry-case containing:
- a pressure controller with adapter
- a MAP 6 pump
- a carry-case containing:
- an ABS-E.W.I. spraying lance
- an air adjustment kit
- a threaded ring for grouting nozzles
- three grouting nozzles Ø 10, 12 & 14 mm
- five spraying nozzles n°5, 6, 7, 8 & 10
- two cleaning balls
- a 7 mm Allen key
- a tube brush
Réf. EC3061
Cat. MAPCPR
EAN : 3664962099181
Public price
12 610,95 € pre-tax
Description
Set composed with a spraying machine and a continuous mixer.
A vibrator is attached to the tank of the machine for a better descent of the product towards the bottom.
The MIXPRO 70 mixer allows a quick and homogeneous mixing of powdered products.
It is equipped with a level sensor that controls the level of product in the spraying machine tank, a speed controller and a water doser.
A vibrator is attached to the tank of the machine for a better descent of the product towards the bottom.
The MIXPRO 70 mixer allows a quick and homogeneous mixing of powdered products.
It is equipped with a level sensor that controls the level of product in the spraying machine tank, a speed controller and a water doser.
Applications
Wide variety of applicable products including powder and ready-to-use : glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
Technical characteristics
MACHINE
Product pressure
0 to 20 bar
Product flow-rate
0 to 20 kg/min
Machine motor power
1,5 kW
Comp. absorbed air flow-rate
284 L/min
Compressor power
2,2 kW
Maximum air pressure
10 bar
Power supply
230 V - 16 A - 50 Hz
Tank capacity
100 L
Maximum grain size
5 mm
Pump
MAP 6
Integrated vibrator
yes
Dimensions (L x w x h)
130 x 70 x 75 cm
Weight
135 kg
Noise level
94 Lwa
MIXER
Mixing type
continuous
Motor
0,75 kW
Forward / reverse rotation speed
50 to 280 RPM
Power supply
230 V - 10 A - 50 & 60 Hz
Tank capacity
40 L
Water meter
integrated
Mixing paddle
continuous scew
Dimensions (L x w x h)
81 x 57 x 49 cm
Weight
41 kg
Delivered with
- a Ø25 mm x 20 m air/product hose
- a pressure controller with adapter
- a MAP 6 pump
- a carry-case containing:
- a pressure controller with adapter
- a MAP 6 pump
- a carry-case containing:
- an ABS-E.W.I. spraying lance
- an air adjustment kit
- a threaded ring for grouting nozzles
- three grouting nozzles Ø 10, 12 & 14 mm
- five spraying nozzles n°5, 6, 7, 8 & 10
- two cleaning balls
- a 7 mm Allen key
- a tube brush
Product datasheet Advice & Documents