PROJECT CP 25 CLASSIC V3 spraying set
Product datasheet 
Advice & DocumentsProduct datasheet
Description
Versatile spraying set for spraying pasty, fibrous, decorative plasters, etc.
The machine is equipped with a button control panel for easy use.
The compressor is equipped with a pressure switch controlling start-up depending on the air pressure in the tank.
The machine is equipped with a button control panel for easy use.
The compressor is equipped with a pressure switch controlling start-up depending on the air pressure in the tank.
Applications
Mortars with admixtures, hydraulic coatings, monolayers, lime-based coatings, high-load technical and special coatings, repointing coatings...
Can also perform External Wall Insulation (E.W.I.) applications with the optional lance.
Can also perform External Wall Insulation (E.W.I.) applications with the optional lance.
Technical characteristics
MACHINE
Product pressure
0 to 30 bar
Product flow-rate
0 to 20 kg/min
Motor power
1,5 kW
Maximum air pressure
10 bar
Power supply
230 V - 16 A - 50 Hz
Tank capacity
59 L
Maximum grain size
6 mm
Pump
MAP 6
Integrated vibrator
no
Dimensions (L x w x h)
134 x 53 x 70 cm
Weight
65 kg
COMPRESSOR
Rotation speed
2850 RPM
Flow-rate of air absorbed
284 L/min (17 m3/h)
Quantity of oil (crankcase)
0,35 L
Oil consumption
0,5 g/h
Motor power
2,2 kW
Electrical supply
230 V
Frequency
50 Hz
Current
10 A
Thermal protection
yes
Safety valve
yes
Tank capacity
2 L
Maximum pressure
10 bar
Air coupling
quick-connect
Dimensions (L x w x h)
58 x 34 x 55 cm
Weight
24 kg
Noise level
92 Lwa
Delivered with
- a Ø25 mm x 10 m air/product hose
- a 10 m air extension
- an carry case containing:
- a 10 m air extension
- an carry case containing:
- an ABS spray lance
- three spraying nozzles n°5, 6 & 7
- two cleaning balls and a tube brush
- a 7 mm Allen key
Réf. EC3063
Cat. MAPCPR
EAN : 3664962100030
Public price
5 790,00 € pre-tax
Description
Versatile spraying set for spraying pasty, fibrous, decorative plasters, etc.
The machine is equipped with a button control panel for easy use.
The compressor is equipped with a pressure switch controlling start-up depending on the air pressure in the tank.
The machine is equipped with a button control panel for easy use.
The compressor is equipped with a pressure switch controlling start-up depending on the air pressure in the tank.
Applications
Mortars with admixtures, hydraulic coatings, monolayers, lime-based coatings, high-load technical and special coatings, repointing coatings...
Can also perform External Wall Insulation (E.W.I.) applications with the optional lance.
Can also perform External Wall Insulation (E.W.I.) applications with the optional lance.
Technical characteristics
MACHINE
Product pressure
0 to 30 bar
Product flow-rate
0 to 20 kg/min
Motor power
1,5 kW
Maximum air pressure
10 bar
Power supply
230 V - 16 A - 50 Hz
Tank capacity
59 L
Maximum grain size
6 mm
Pump
MAP 6
Integrated vibrator
no
Dimensions (L x w x h)
134 x 53 x 70 cm
Weight
65 kg
COMPRESSOR
Rotation speed
2850 RPM
Flow-rate of air absorbed
284 L/min (17 m3/h)
Quantity of oil (crankcase)
0,35 L
Oil consumption
0,5 g/h
Motor power
2,2 kW
Electrical supply
230 V
Frequency
50 Hz
Current
10 A
Thermal protection
yes
Safety valve
yes
Tank capacity
2 L
Maximum pressure
10 bar
Air coupling
quick-connect
Dimensions (L x w x h)
58 x 34 x 55 cm
Weight
24 kg
Noise level
92 Lwa
Delivered with
- a Ø25 mm x 10 m air/product hose
- a 10 m air extension
- an carry case containing:
- a 10 m air extension
- an carry case containing:
- an ABS spray lance
- three spraying nozzles n°5, 6 & 7
- two cleaning balls and a tube brush
- a 7 mm Allen key
Product datasheet Advice & Documents